Start with a general description, move towards a precise description:
Denomination - Date and Mintmark - Variety Type - ListingAxiom #1 tells us there are exceptions to every rule so there will need to be some flexibility in how this is done. Denomination is all well and good but there is a 1909 cent with an Indian on the front, another with Abe Lincoln. There's 5 different quarter designs for the State or ATB Quarters in any given year. I will need more information to disambiguate some coins.
Denomination - Date and Mintmark - Disambiguation - Variety Type - ListingThat should work. I mostly deal with US coins. I suppose I'll need to add Country of Origin as needed.
Denomination
Half Cent | 1/2C |
Cent | 1C |
2 Cent | 2C |
3 Cent | 3C |
5 Cent | 5C |
10 Cent | 10C |
20 Cent | 20C |
25 Cent | 25C |
50 Cent | 50C |
Dollar | $1 |
2 Dollars | $2 |
2.5 Dollars | $2.5 |
3 Dollars | $3 |
4 Dollars | $4 |
5 Dollars | $5 |
10 Dollars | $10 |
20 Dollars | $20 |
50 Dollars | $50 |
100 Dollars | $100 |
Date and Mintmark
This is fairly straightforward. There may need to add disambiguation for Large Date-Small Date and other design varieties.
Disambiguation
This deals with finish, composition, design type when more than 1 major design is used for a given date and mintmark, and other necessary discriminating information.
LD Large Date
SD Small Date
PR Proof
RP Reverse Proof
FM Frosted Matte Finish
SF Satin Finish
EH Enhanced Finish
CU Copper
SV Silver
ZN Zinc
Variety Type
Wexler puts a W in front of his DDO to make WDDO. I'll use...P.
PDDO | Doubled Die Obverse |
PDDR | Doubled Die Reverse |
PRPM | RePunched Mintmark |
POMM | Over MintMark |
PIMM | Inverted MintMark |
PMMV | MintMark Variety |
PODV | Obverse Design Variety |
PRDV | Reverse Design Variety |
PCLO | Clashed Die Obverse |
PCLR | Clashed Die Reverse |
PDCH | Die CHip |
PDCR | Die CRrack |
PDBR | Die BReak |
PCO | Cud Obverse |
PCR | Cud Reverse |
PLLO | Lathe Lines Obverse |
PLLR | Lathe Lines Reverse |
PRPD | RePunched Date |
PMPD | MisPlaced Date |
POVD | OVer Date |
Listing
The number I assign. I'm thinking I'll try to match it up with CONECA as much as possible.
If that's not good enough, CONECA will simply have to change their ways.
Different dies of the same variety would have a decimal added. For example, a 1988-D 1c RDV-006, Die 3 of 3 would be 1C-1988D-RDV-006.3.
go tell coneca it's time to change allll their listings! love it ken, i have full faith in your attribution and differentiating, where when i see a
ReplyDelete25C-2017P-PCDR-001
i'll know what it is :)